While the 2014 KTM 690 Enduro R that I picked up recently was only slightly used, the previous owner reminded me in the form of liquid weld just what can happen if the engine isn't protected. As shown in the picture below, something clearly "got in there" and punctured the clutch cover, and while the liquid weld was holding up pretty well, it was also just leaking slightly enough that it was time to just replace the cover itself.
Saving a little weight often seems like a lost cause on a 500+ pound "pig" like my BMW R1200GS Adventure, but then again, every little bit helps. Some significant weight was shaved with aftermarket exhaust last year and of course heading to the gym recently has helped as well, but these last 10 pounds lost from my adventure riding setup come thanks to Shorai Power!
What should we call this technique, anyway? It's not jump-starting, as we never touched the battery, and it's not bump-starting, because neither bike wasn't actually rolling. Out of respect for the single cylinder 4-stroke thumper that started the bigger BMW, should we call it Thump-starting?